Following is a table that gives installed versions and errors on all of our different scanning stations. 12/4/06
| Scanning | Profiler | |
|---|---|---|
| Old VRS | 3.2.93 | 3.2.67 |
| non batch | 10 page select * | works, no clear |
| batch | 10 page select * | works, no clear |
| New VRS | 3.1.84 | 4.0.2 |
| non batch | 9th page, 10 page select | 9th page |
| batch | N/A | 9th page |
| New USB | 3.2.93 | 4.0.2 |
| non batch | 9th page, 10 page select | 9th page |
| batch | 9th page, 10 page select | 9th page |
| KathyR USB | 3.2.93 | 3.2.67 |
| non batch | 10 page select | works, no clear |
| batch | 10 page select | works, no clear |
| KathyN USB | 3.2.93 | 3.2.67 |
| non batch | 10 page select | works, no clear |
| batch | 10 page select | works, no clear |
* = Notice difference in errors between the same versioned programs. At first, I thought this was from when VRS is turned off/on via the Config utility. Not so. The 9th page error is inconsistant amongs the release numbers and configurations. Maybe has to do with combination of Scanner and Profiler versions, plus VRS status?
9th page = The 9th page of a group of scanned documents cannot be manipulated fully. It cammot be selected, using any o the multiple selection methods, it cannot be rotated, effects cannot be taken on it, but it can be deleted and moved. If moved, a new page becomes the ninth, inheriting the above problems.
10 page select = Only 10 pages at max can be selected at once. If you try to select x=11 or x=12, etc documents, the last x-10 gets unselected. If you select from the end of the document pages, the last x-10 still get removed. The 9th documents, when not working, does not count toward the 10.
no clear = Clearing of profile fields was fixed in a new release, specifically for UMBC back-compatibility.